I just tested a new tool from Bosch. It is made to work with any of these new multifunction oscillating tools. I happen to have a Bosch electric one and I also have a air operated Chicago Pneumatic one. I put both of them to work with my newly acquired Bosch Carbide Oscillating Blade for heavy metal. I got this to test for the Stuffstuff company, which is part of the handyman club I belong to.
Here is what I found:
This Bosch Carbide Oscillating Blade for heavy metal really lives up to the Bosch name! It cut right thru 3/4 rebar like butter! I tried it with my Bosch electric Multifunction oscillating tool and my Chicago pneumatic air operated oscillating tool and it worked great with both of them. With the universal mounting holes set up on this blade it was so easy to go from one brand of tool to another. I have some other multifunction tools and they come with adapter plates that you have to keep playing around with. It takes longer to mount the tool than it does to do some jobs. So I say this Bosch Carbide Oscillating Blade for heavy metal is tops on my list of Oscillating Blades and tools. It still almost looks unused after doing about 30 plus cuts!! barely scuffed it up!!
Here is what I found:
This Bosch Carbide Oscillating Blade for heavy metal really lives up to the Bosch name! It cut right thru 3/4 rebar like butter! I tried it with my Bosch electric Multifunction oscillating tool and my Chicago pneumatic air operated oscillating tool and it worked great with both of them. With the universal mounting holes set up on this blade it was so easy to go from one brand of tool to another. I have some other multifunction tools and they come with adapter plates that you have to keep playing around with. It takes longer to mount the tool than it does to do some jobs. So I say this Bosch Carbide Oscillating Blade for heavy metal is tops on my list of Oscillating Blades and tools. It still almost looks unused after doing about 30 plus cuts!! barely scuffed it up!!
In the package!
Ready to go!
This Bosch Carbide Oscillating Blade for heavy metal operates effortlessly, no need to push down on the multifunction tool at all. Just the weight of the tool is enough to cut everything I needed to cut! I cuts your job time way down, so if you are pressed for time, it is a big time saver! Universal use; it can be used on any multifunction tool due to the universal mount holes pre-drilled on the blade! I also like the built in ruler on the blade, no need to stop and measure how deep you have cut if you are just notching some thick metal. it goes from tip to the frame 1 11/16 of an inch, so for most projects that is plenty, at least for my uses any way!
The operation was flawless and this Bosch Carbide Oscillating Blade for heavy metal should outlast probably any other metal cutter I own by 10 fold! I used another "heavy metal cutter" and the metal cut up the cutter before the cutter made it thru the metal!! As long as the Bosch Carbide Oscillating Blade for heavy metal is not abused, it should last for hundreds of cuts!! But always make sure to use a lube and keep the blade cooled!!!
Bosch Blade Mounted on Air Tool Cheap Blade below
Electric Multi Tool!
Bosch on Right Quality difference!
Bosch on top Far better quality!
Thank you so much for such an informative piece of information :)
ReplyDeleteIf anyone interested similar one's have a look here
DiYsBest
Thanks